Steam Generator with Liquid Fuel LPG, and Natural Gas

  • Termo Çelik Steam Generator with Spiral Pipe. It has been designed to fulfill the industrial needs for maximum security, for fast obtaining of steam and for saving from time, place and energy.
  • Termo Çelik Steam Generator is a compact system with high performance. Only three minutes are enough to produce desired amount of steam.
  • Termo Çelik Steam Generator has TSEK certificate and produced in compliance with respective norms.

Burner

  • Mono-block burners with full automatic and high combustion capacity, with low fuel consumption, and with long-term combustion lids are mounted.

Design with Three Transitions

  • Combustion completes in the combustion chamber (1st transition). Gasses, emerging from the complete combustion, go to the 2nd transition via two aligned pipes. This is followed by passage through the wall (3rd transition).
  • Gases gather in the rear part of the steam generator and dispose.

Instant Detection of Defect

  • Any failure can be observed instantly via the indicator.

Security

Combustion of the burners was blocked after evaluation of various data.

  • When the level of feeding water is low,
  • When smoke-hole gas temperature is too high,
  • When the water level in the steam boiler is low,
  • When the pressure rises high,
  • When temperature of steam is too high,
  • When the burner fan is out of order, the system deactivates the burner circuit.
  • The photocell circuit for gas oil and fuel-oil controls the combustion.
  • At natural gas and LPG, the ionization electrode controls combustion.
  • In spite of all these, if the pressure is higher than the desired value the security ventilator opens and the steam goes out.
  • The burner was stopped when the feeding water pump disposes the Thermal.
-

Insulate

  • Fire concrete is poured into the front covers, resisting 13500C.
  • Outer body of the steam generator is insulated by 900oC-resisting Insulating and the surface by 1mm painted metal sheet.

Fast Evaporation

  • It evaporates in 3 minutes.
  • The energy emerged after the combustion immediately passes in the water and steam is obtained in a short while since there is a little water in the pipes. Than a fair amount in saving of fuel is obtained.
  • Lose of heat is a little, since temperature exchange surfaces are a few, when waiting for or during the operation. It adapts itself to load changes as soon as possible.

Feeding Water Pump

  • SPECK-TRIPLEX TYPE PUMP SPECIFICATIONS. A pump with ceramic pistons, Triplex type (three pistons), that can be operated in max. 1050C water, that can pump water between 0-60 bar pressures, and of which water level is not changed when changes occur in pressures.
-

Application Field

  • These boilers are the most suitable solution for demands of providing fast and high steam pressure without any need for secure burners in such many industries as, machinery, food, textile, chemistry, dying, dry cleaning,
-

MODEL
Capacity
Dimensions
Weight
Length
Width
Height
Smoke-hole
Kw
Kcal/h
Kg/h
L
W
H
Kg
150
174
150000
250
1470
1450
1350
200
750
250
290
250000
415
1470
1460
1370
200
870
400
465
400000
650
2100
1460
1370
250
1250
500
580
500000
800
2100
1460
1370
250
1250
600
698
600000
1000
2100
1460
1370
250
1350
800
930
800000
1300
3000
1460
1370
250
1350
1000
1163
1000000
1600
3000
1685
1650
350
2000
1200
1395
1200000
2000
3100
1685
1650
350
2300
1500
1744
1500000
2500
3270
1740
1850
450
3200
1800
2093
1800000
3000
3750
1740
1850
450
3300